Views: 0 Author: Site Editor Publish Time: 2022-12-04 Origin: Site
The plastic washing machine device includes a filter box, the top of the filter box is connected with a first water inlet pipe, the top of the right side of the filter box is fixedly connected with a fixing plate, the inside of the filter box is provided with a first filter screen, the filter box is The top of the left side is communicated with a miscellaneous bucket, and the bottom of the fixed plate is fixedly connected with an automatic cleaning mechanism.
What are the processing steps of the plastic washing machine?
What are the processing units and design parameters of the plastic washing machine?
are the components of a plastic washing machine?
(1) Sedimentation: the sewage for cleaning waste plastics flows into the sedimentation tank to precipitate sediment;
(2) Filtration: pass the sewage after sedimentation through a 50-100 mesh filter;
(3) Multi-stage filtration again: filter the filtered sewage through 100-200 mesh, 200-300 mesh, 300-500 mesh, 500-800 mesh, 800-1000 mesh filter screen respectively, so that the suspended The material is continuously separated to become clean water, which is recycled;
(4) Naturally drain and dry the sedimented sediment and suspended solids and send them to the landfill for disposal.
Plastic washing machine Wet grinder equipped with V-cut technology rotors and flame-treated hardened knives to cut and wash materials.
Turbine cleaner
A high-speed washer with a screen washes the material; dirt flows off the screen with the water.
Sink Floating Tank
A jar separates different materials based on their density. Light material is discharged from the end of the tank, while heavier material is discharged through spirals on the bottom and sides.
Spiral Washer
Wash the material again for high cleanliness.
mechanical dryer
Water was removed by a high-speed centrifuge.
Thermal dryer
This second dryer is electrically heated to further dry the material using high temperatures.
packaging unit
Dual outputs allow for bagging twice in a batch.
(1) Grille. Set up a stainless steel grid, the grid gap is 6mm, and the grid slag is cleaned manually.
(2) Regulating pool. There is one underground reinforced concrete structure, with an effective volume of 200m3 and an effective water depth of 3.5m. Blast aeration is installed in the pool, and the air diffusion device is a perforated tube aerator.
(3) Hydrolysis and acidification pool. The underground reinforced concrete structure is adopted, with a total of 1, the effective water depth is 3.5m, the effective volume is 70m3, the filler is hung in the pool, and the upflow speed in the pool is controlled at 0.8m/h.
(4) Primary sedimentation tank. Adopt vertical flow sedimentation tank, steel structure. The sedimentation time is 1.5h, the hydraulic surface load is 1.5m3/(m2.h), and the sludge from the primary sedimentation tank is discharged to the sludge thickening tank.
Zhangjiagang YaTong Machinery Co., Ltd. can ensure the plastic washing machine’s quality and the after-sales service for any product. Customers can order their products with confidence. For more information, please connect Zhangjiagang YaTong Machinery Co., Ltd.
