Views: 0 Author: Site Editor Publish Time: 2022-11-21 Origin: Site
Plastic shredders can also shred some plastic products. Before recycling and granulating waste plastics, it needs to be cleaned, pulverized and cleaned, and the waste plastics are cut into material standards that can be directly melted and extruded with a plastic granulator. The two types of shredders, plastic shredders and shredders, are mostly used for the shredding and impurity removal of waste plastics.
What is the difference between plastic shredder and plastic shredder in structure and use?
How to properly dispose of plastic shredder?
What are the correct steps to use plastic shredder?
Plastic shredders can be divided into single-shaft shredders, double-shaft shredders and double-shaft shredders according to different structures;
The single-shaft shredder is designed with only one cutter roller and one motor driven by power, with relatively low power and low power consumption. Small plastic recycling and granulation plants are more suitable for single shaft shredders. The two main shafts of the double-shaft shredder are used to mesh the blades of the drum; generally, it is equipped with 2 motors and 2 reducers, which have strong power and large power consumption.
The double-shaft shredder is suitable for large-scale plastic recycling enterprises, and has clear quantitative standards for daily production capacity and shredding volume. For example, if some users need to produce about ten tons, they need to choose a double-shaft shredder.
Operate the equipment strictly in accordance with the regulations. Operators should receive training before taking up their jobs. When operating the equipment, the operating rules should be followed. Pay attention to check the operation of the plastic shredder, and test the unknown material. Do not exceed the hardness range of the milled material. Excessive or uneven feeding can cause material blockage, some of which are caused by improper operation, which will suddenly increase the current of the machine, and the automatic circuit protection device will stop protecting the circuit, causing plastic shredder material to block.
If the plastic shredder is blocked at the feed port, turn on the motor to reverse the cutter shaft, turn the material out, and then rotate forward. If the socket is clogged, first turn off the power and check for the fault. The angle of the vent can be considered vertical.
1. The plastic shredder chooses motor equipment with sufficient power and guaranteed.
2. Always check the vulnerable parts of the plastic shredder. If necessary, it should be replaced immediately and do not use, otherwise problems will occur.
3. Regularly add lubricating oil to the bearings in the machine to ensure bearing torque, reduce friction pressure and prolong bearing service life.
4. When the plastic shredder fails, it should be stopped immediately, and workers should be kept away from mechanical equipment before inspection.
Zhangjiagang YaTong Machinery Co., Ltd.’s knowledgeable staff can find the best solution for any situation, especially if you need a customized product. We work with customers from design to completion to ensure that all technical requirements are met.
